Table of Contents
Advertisement
Battery
It takes up to 16 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:
Operation
While in handset use (talking*)
While in speakerphone mode (talking*)
While not in use (standby**)
*Operating times are approximate. Your results may vary.
**Handset is off the telephone base but not in use.
The battery needs charging when:
•
A new battery is installed in the handset.
•
The handset beeps.
•
LOW BATTERY is displayed and the battery indicator on the handset screen is flashing.
CAUTION:
To reduce the risk of fire or injury to persons, read and follow these instructions:
•
Use only the battery(ies) provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511.
In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.
•
Do not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special disposal
instructions.
•
Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte
may be toxic if swallowed.
•
Exercise care in handling batteries in order not to create a short circuit with conductive materials such as rings, bracelets, and keys. The
battery and/or conductor may overheat and cause burns.
•
Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified
in this manual.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO WATER OR ANY TYPE OF MOISTURE.
Operating time
Nine hours
One and a half hours
Five days
www.vtechphones.com
45
Advertisement
Table of Contents
