Page 1
NR-P101E-TQ, NR-P401E-TQ Gigabit PoE Extenders Manual NR-P401E-TQ NR-P101E-TQ Features: • Extends the range of PoE Ethernet devices • Easy plug-and-play installation over Cat5e or higher cables an additional • Compliant with IEEE802.3af, IEEE802.3at 328ft (100m) • Automatically detects PoE equipment and •...
Page 2
ENFORCER Gigabit PoE Extenders Introduction: The ENFORCER Gigabit PoE Extenders connects PoE cameras, IP access control, IP telephony, IP speakers/intercoms, or other PoE devices using a single Cat5e or Cat6 cable to extend its data and power range by an additional 328ft (100m). The NR-P401E-TQ supports up to 4 PoE devices.
Page 3
PoE camera, ensuring that neither cable exceeds 328ft (100m) in length. 2. Mount the NR-P101E-TQ using 4 screws (not included) and the mounting tabs. 3. For the NR-P401E-TQ, attach the two mounting brackets to the extender, using the 4 included extender bracket mounting screws.
Page 4
ENFORCER Gigabit PoE Extenders Troubleshooting: • Ensure that all devices are turned on • Ensure that the PoE device is functioning by plugging it directly into the PoE switch, computer, etc. • Double-check that the cables were connected properly • Run a continuity test on all wires in the cable •...
Need help?
Do you have a question about the NR-P101E-TQ and is the answer not in the manual?
Questions and answers