Play messages
To play messages with the telephone base:
/PLaY/
Press
Options during playback:
/VOL+ or
•
Press
Press /SKIP to skip to the next message.
•
Press /rePeaT to repeat the message currently playing.
•
Press /rePeaT twice to listen to the previous message.
Press X/DeLeTe to delete the current message. The system
•
advances to the next message.
/
•
Press
PLaY
To play messages with a handset:
Press MeNU/SeLeCT twice when the telephone is not in use.
If you have either new or old messages, the messages play
automatically. If you have both new and old messages:
•
To play new messages, press
>Play new msgs.
To play old messages, scroll to select >Play old msgs and
•
then press
Options during playback:
Press / VOL or
•
eQ to adjust the handset message playback audio
•
Press
quality.
Press 6 to skip to the next message.
•
Press 4 to repeat the message currently playing. Press 4 twice
•
to listen to the previous message.
Press 3 to delete the current message. The system advances
•
to the next message.
Press 5 to stop.
•
Delete all messages
To delete all messages at the telephone base:
Press X/DeLeTe when the phone is not in use.
To delete all messages with a handset:
Press MeNU/
.
Scroll to select >answering Sys and then >Delete all old
2.
messages? Press
Call intercept
If you want to talk to the person whose message is being
recorded, press
access the answering system remotely
.
Dial your telephone number from any touch-tone telephone.
2.
When the system plays your announcement, enter the
two-digit remote code. The preset code is 19.
3.
Then you can enter one of the following remote commands.
Command
1
2
3
33
4
44
5
*5
6
*7
8
0
Hang up or press 8 to end the call.
4.
IMPOrTaNT!
If you have difficulty with your telephone and headset, please
refer to the user's manual for a full set of installation and
operation instructions. For customer service, visit our website at
www.vtechphones.com or call (00) 595-95. In Canada, go
to www.vtechcanada.com or call (00) 26-3.
when the telephone is not in use.
STOP
/VOL- to adjust the speaker volume.
/STOP to stop.
/SeLeCT.
MeNU
VOL/
when the handset is not in use.
SeLeCT
MeNU
/
or
FLaSH
Play all messages.
Play only new messages.
Delete the current message (during playback).
Delete all old messages.
Repeat the current message (during playback).
Skip to the previous message (during playback).
Stop.
Hear a list of remote commands.
Skip to the next message (during playback).
Record a new announcement.
End the call.
Turn the answering system on or off.
/SeLeCT to select
MeNU
to adjust the speaker volume.
CID
/SeLeCT.
on the handset.
Function
96-0022-00-00
Need help?
Do you have a question about the IS6100 and is the answer not in the manual?