BorMann BSS1800 Translation Of The Original Instructions page 13

• This tool may only be used for dry
grinding/sanding operations.
• Always guide the power cable away from the
back of the tool.
• Use of the tool on materials containing asbestos
is prohibited.
• Always remove the plug from the power supply
socket before carrying out any work on the
machine (cleaning the sander, changing the
sandpaper, etc.).
• Always disconnect the machine by removing
the plug from the socket, not by pulling on the
power cable.
• To protect your health, always wear safety
goggles and a dust mask during sanding work.
• Keep your workplace clean and well
illuminated.
• Make sure that the workpiece is sufficiently
secured so that it cannot slip.
• Keep children away.
• For your own sake, keep the machine clean at
all times and check it for signs of damage each
time after using it.
• Make sure that the switch is set to OFF before
you insert the plug into the power supply socket.
Make sure of your footing, particularly when
working on ladders and platforms.
• Touching or inhaling this dust can be harmful
for the operator and other persons nearby.
• Hold the equipment by the insulated handles
because the grinding/sanding belt may strike the
equipment's own power cable. Damaging a live
cable may make the metal parts of the
equipment live and cause an electric shock.
• If you discover any damage to the machine, use
the exploded diagram and the spare parts list to
determine which parts need to be ordered from
Customer Service.
• Important! Wear safety goggles and a dust
mask.
Do not lose these safety instructions
Caution - Read the operating
instructions to reduce the risk of
inquiry
Wear ear-muffs.
The impact of noise can cause
damage to hearing.
Wear a breathing mask.
Dust which is injurious to health can
be generated when working on wood
and other materials.
Never use the device to work on any
materials containing asbestos!
Wear safety goggles.
Sparks generated during working or
splinters, chips and dust emitted by
the device can cause loss of sight.
2. Layout and items supplied (Figure 1)
2.1 Layout
1. Additional handle
2. Operating switch
3. Power cable
4. Handle
5. Chip extractor adapter
6. Oscillating plate
7. Clamp lever
8. Connector of dust collector
2.2 Items supplied
• Open the packaging and take out the
13