Wireless Schedule - TP-Link TD-W9970 User Manual

64-bit: You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 5 ASCII characters.
128-bit: You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 13 ASCII characters.

Note:
If you do not set the key, the wireless security function is still disabled even if you have selected Shared
Key as Authentication Type.
Be sure to click Save

4.7.4 Wireless Schedule

Go to Wireless Wireless
→

Note:
Click the schedule table or use the
Before configure the wireless schedule, please set system time first which refer to
Settings, then you can enable or disable Wireless Schedule.
Apply To: Select the day or days you want to switch the wireless off.

Start/End Time: You can select all day-24 hours or you may enter the

Time in the corresponding field.
Add: Click to add your selected time to the below table.

Click Clear Schedule
Click Save to complete the settings.
to save your settings on this page.
Schedule, you can configure the Task Schedule as shown below.
Add button to choose the period you need the wireless off.
to clear your settings in the table.
57
TD-W9970 User Guide
4.21.2 Time
Start Time and End