TP-Link TD-W9970 User Manual page 99

Enable Bandwidth Control:

effect.
Line Type: Select the right type for you network connection. If you don't know how to choose,

please ask your ISP for the information.
Total Upstream Bandwidth:

Total Downstream Bandwidth:

Description: This is the information about the rules such as address range.

Priority: Priority of Bandwidth Control rules.

the lowest priority. The total Upstream/ Downstream Bandwidth is first allocated to guarantee
all the Min Rate of Bandwidth Control rules. If there is any bandwidth left, it is first allocated to
the rule with the highest priority, then to the rule with the second highest priority, and so on.
Upstream bandwidth:

port, the default is 0.
Downstream bandwidth:

WAN port, the default is 0.
Status: The status of this rule either Enabled or Disabled.

Edit: Click Edit to modify the rule.

To add/modify a Bandwidth Control rule, follow the steps below.
1. Click Add New.
2. Enter the information in the screen.
Check this box so that the bandwidth control settings can take
The upload speed through the WAN port
The download speed through the WAN port.
This field displays the max and mix upload bandwidth through the WAN
This field displays the max and mix download bandwidth through the
91
1 stands for the highest priority while
TD-W9970 User Guide
.
8 stands for