Download
Share
Print this page
TP-Link TD-W8951NB Installation Manual
  1. Manuals
  2. Brands
  3. TP-Link Manuals
  4. Modem
  5. TD-W8951NB
  6. Installation manual
TP-Link TD-W8951NB Installation Manual

TP-Link TD-W8951NB Installation Manual

Td-w8951nb v4 qig 7106503703
Hide thumbs Also See for TD-W8951NB:

Advertisement

Quick Links

Download this manual See also: User Manual
Installation
Note
The product model shown in this QIG is TD-W8951ND, as an example.
Note
Please use only wired network connections to configure the router.
Power down all your network devices, including your computer(s) and the
Modem Router. If you currently use a modem, disconnect it now - the
Modem Router will replace your current modem.
Connect your computer to the
Port labeled "1~4" on the Router
with an Ethernet cable.
Connect the splitter to the wall
jack using a telephone line, then
use the other telephone line to
connect to the ADSL port on the
Router and the MODEM port of
the
splitter,
also
PHONE port of the splitter
connected to a telephone.
If no telephone is needed, please connect the ADSL port of the Router to
Note
the wall jack using the telephone line directly.
have
the
1

Advertisement

loading

Related Manuals for TP-Link TD-W8951NB

Summary of Contents for TP-Link TD-W8951NB

  • Page 1 Installation Note The product model shown in this QIG is TD-W8951ND, as an example. Note Please use only wired network connections to configure the router. Power down all your network devices, including your computer(s) and the Modem Router. If you currently use a modem, disconnect it now - the Modem Router will replace your current modem.
  • Page 2 LED turns off after flashing, please contact your ISP to ensure that you r internet connection is active. To configure the device, you can either run the setup CD-ROM (method one), Note or run the Web based Quick Setup Wizard (method two). TP-LINK strongly recommends that you run the setup CD-ROM.
  • Page 3 Insert the provided Resource CD into your CD-ROM drive. The Setup Wizard will automatically pop up on your computer’s screen. Please select your product model and click Start Setup Then a flash video will pop up and show you how to connect you r devices.
  • Page 4 Login Open your web browser and type 192.168.1.1 in the address bar and press Enter A dialog box will prompt you for the User name and Password. Enter the default values and click OK. User name: admin Password: admin Click OK If the dialog box does not pop up, please refer to T3 in the Troubleshooting Note guide and T2 will give you some help if you forget the password.
  • Page 5 Internet Parameters Configuration This page will then display. Click RUN WIZARD Click NEXT Select the appropriate Time Zone for your location from the drop-down list Click NEXT Choose the Connection Type given by your ISP. If PPPoE/PPPoA is selected, please proceed to A; If Dynamic IP is selected, please skip to B;...
  • Page 6 A. Configuration for PPPoE/PPPoA This page will then display. Enter the PPPoE/PPPoA information provided by your ISP Click NEXT If you did not get the VPI, VCI and Connection Type information, Note please contact your ISP for this information. B. Configuration for Dynamic IP This page will then display.
  • Page 7 D. Configuration for Bridge Mode This page will then display. Enter the Bridge information provided by your ISP Click NEXT A fter completing the above configuration, please proceed to Wireless Settings Configuration Wireless Settings Configuration This page will then display. Keep the default setting: Activated.
  • Page 8 Modem Router while it’s rebooting. The basic settings for your Router are completed. Please open the web browser and log on to the following websites: http://www.tp-link.com http://www.google.com If the above websites can be accessed, it indicates that your Router has been configured successfully and you can start to enjoy the Internet.

  • Page 9: Troubleshooting

    Troubleshooting T1. How do I restore my Router’s configuration to its factory default settings? With the Router powered on, press and hold the RESET button on the rear panel for 8 to 10 seconds before releasing it. Press it for 8 to 10 seconds Once the Router is reset, the current configuration settings will be lost and Note you will need to re-configure the router.
  • Page 10 Click Network Connections Right-click Local Area Connection Click Properties Double-click Internet Protocol (TCP/IP)
  • Page 11 Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK Click OK...
  • Page 12 For Windows Vista OS Go to Start > Settings >Control Panel, and then you will see the following page. Click View network status and tasks Click View status Click Properties...
  • Page 13 Double-click Internet Protocol V ersion 4 (TCP/IPv4) Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK...
  • Page 14 For Windows 7 OS Go to Start > Settings > Control Panel, and then you will see the following page. Click View network status and tasks Click Change adapter settings Right-click Local Area Connection Click Properties...
  • Page 15 Double-click Internet Protocol V ersion 4 (TCP/IPv4) Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK...
  • Page 16 2) Configure your IE browser Open your IE browser, click Tools tab and you will see the following screen. Click Internet Options Select Never dial a connection Click OK Now, try to log on to the Web-based configuration page again after the above settings have been configured.
  • Page 17 Router by following the instructions of this QIG. 5) Please feel free to contact our Technical Support if the problem still exists. For more details about Troubleshooting and Technical Support contact Note information, please log on to our Technical Support Website: http://www.tp-link.com/support/Support.asp...

  • Page 18: Technical Support

    9:00 AM to 6:00 PM E-mail: support.usa@tp-link.com Service time: 24hrs, 7 days a week Indonesia Tel: (+62 ) 021 6259 135 Malaysia E-mail : support.id@tp-link.com Tel: 1300 88 875465 (1300 Service time : Monday to Friday, 88TPLINK) 9:00 -12:00 ; 13:00 -18:00 Email: support.my@tp-link.com...