Advertisement
Modem Configuration Guide
4. CONFIGURING WIRELESS
To use Wireless, ensure that you already have set up your wireless adapter.
A. Click Start -> Settings -> Network and Internet
B. Click Wi-Fi and then find the SSID (Network name) of your
modem. By default, the network name should be WiFi-xxxx
(xxxx is a random 4 digit alpha numeric code).
Note: You may notice there are two wireless networks present.
You may connect to either of these, but if you are experiencing
slow speeds on your Wi-Fi connection we recommend
connecting your device to the 5G wireless network.
C. Ensure Connect Automatically is ticked,
and then Click Connect.
D. You will now be prompted to enter your network security
key/ Wireless password. By default, the WiFi password is
printed on a sticker underneath your modem (WLAN Key).
E. Click NEXT to finish.
Note: You'll see an option that says "share this network with
my contacts". We recommend you don't tick this box.
F. You should now see your status as 'Connected'.
5. CHANGE OF PASSWORD
For security purposes we highly recommend that you change your password if you are using your default or if you believe your
password security has been compromised. For password information, please visit www.tpg.com.au/support.
PLEASE NOTE:
Each time your modem is powered on, it will initialize this automated authentication process after which your modem will
receive a public IP address (fixed or dynamic depending on your plan) and DNS settings from TPG.
tpg.com.au/support
13 14 23
VR1600v
WiFi-Y659
5
Advertisement
