Rip Settings - TP-Link TD-W9970 User Manual

2. Enter the following data:
Destination IP Address:

that you want to assign to a static route.
Subnet Mask: The

portion, and which portion is the host portion.
Gateway: Here you should type the gateway address correctly, and the option for

will adopt the default gateway address for the Static Route.
Interface: Select the interface name in the text box, or else, the default interface will be

adopted for the Static Route.
Status: Select Enabled

3. Click Save to make the settings effective.
To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click Edit as desired on the
Click Enable/ Disabled Selected
Click Delete Selected

4.10.3 RIP Settings

Go to Route Settings
which allows you to configure the RIP.
The Destination IP Address
Subnet Mask determines which portion of an IP address is the network
or Disabled from the drop-down
Edit column.
to make selected entries enabled/disabled.
to delete selected entries.
RIP Settings, you can see the RIP (Routing Information Protocol) screen
→
is the address of the network or host
list.
71
TD-W9970 User Guide
Interface