TP-Link TD-W9970 User Manual page 15

Method Two: Wireless
Click the network icon of your computer or go to Wi-Fi Setting of your smart device, then use
the default SSID (Wireless Network Name) and Wireless Password printed on the product
label of the modem router to join the network.
Method Three: Via the WPS button
Wireless devices that support WPS, including Android phones, tablets, most USB network
cards, can be connected to your router through this method. (WPS is not supported by iOS
devices.)

Note:
The WPS function c annot be configured if the wireless function of the modem router is disabled. Also,
the WPS function will be disabled if your wireless encryption is WEP. Please make sure the wireless
function is enabled and is configured with the appropriate encryption before configuring the WPS.
1) Tap the WPS icon on the device's screen.
2) Immediately press the WPS button on your modem router.
3) The WPS LED flashes for about two minutes during the WPS process.
4) When the WPS When the WPS LED is on, the client device has successfully connected
to the modem router.
Step 3: Attach the power adapter. The electrical outlet shall be installed near the device and shall
be easily accessible.
7
TD-W9970 User Guide