Table of Contents
Advertisement
Assembly
1.
When the springs have been replaced assemble as follows:
A. Fit the two clutch shoes and the two springs and put the
unit in a vice.
B. Tighten the vice so that the shoe holder can be pushed
down between the clutch shoes.
2.
Lubricate and fit the needle bearing (D), clutch drum (C)
and washer (B).
3.
Use a 19 mm spanner and fit the clutch hub.
NOTE! left-hand thread.
4.
Remove the piston stop (A) and fit the spark plug. Tighten-
ing torque: 15 Nm.
5.
Fit the clutch cover. Adjust the chain tension, see the
Operator's manual. Tighten the bar cover nut to 15 Nm.
24
– English
CENTRIFUGAL CLUTCH
B
C
A
D
Hide quick links:
Advertisement
Table of Contents
