Headset Installation And Operating Instructions - VTech VT 2960 User Manual

HEADSET INSTALLATION AND OPERATING
INSTRUCTIONS
Your VT2960 cordless telephone is
equipped with a 2.5mm Headset Jack
for use with an optional accessory
Headset or hands-free operation.
If you choose to use the Headset op-
tion, you must do the following:
INSTALLATION
Obtain an optional accessory Headset,
which is compatible with the VT2960.
Once you have a compatible 2.5mm
Headset, locate the Headset Jack on
the Handset of your VT2960. Connect
the plug on the Headset to the jack on
the cordless Handset. The plug should
fit securely. Do not force the connec-
tion. See illustration.
PLUG THE OPTIONAL
HEADSET INTO THE
JACK
1 LINE 2
FLASH FLASH
LINE 1 LINE 2
OFF
abc def
1 2 3
ghi jkl mno
6
4 5
pqrs tuv wxyz
7 8 9
tone oper
*
0
CID
REDIAL HOLD
P AUSE
MEM CONF INT.COM
PROG CLEAR DELETE
The headset has a monaural design
which is reversible, so you can wear
your Headset on either the left or right
ear, leaving one ear free for room
conversation.
ON LEFT EAR
ON RIGHT EAR
The headband can be adjusted to fit
the contour of your head. Using both
hands, slide the headband up or down
so that it rests comfortably on your
head with the speaker cushion
centered against your ear.
For maximum sound quality, the
flexible microphone should be
positioned at the corner or your mouth,
about one inch from your face. For
maximum sound quality, the flexible
microphone should be positioned at
the corner or your mouth, about one
inch from your face.
ONE
INCH
36