Table of Contents
Advertisement
~ F ) E " R . A T I N G I N S T R U C T I O N S
A Z . i & L
-
L.
1
Press 9
Press HOLD
Dial 555-1234
Press MEM
The 917ADXcordless phone automati-
cally stores the last number you dialed in a
special redial memory.
To redial the last number, press PHONE
(on the Handset) or SPKR (on the Base Unit),
then REDIAL.
L?!z!<v:;aL
%TOURING A REDIAL NUMBER IN MEMORY
D, I A Lw*: .
p
s f
..
I
I
To store the last number you dialed as a
regular Memory Dial number, do the follow-
ing on the Handset:
1
Press PRGIPRV
Press the Memory Location key where the
phone number will be stored (0-9)
Press REDIAL
I
Press MEM
I
If you are experiencing noise or interfer-
ence when using your Handset, press the
CHAN key to switch to a clear channel. This
function is available when you are on a call or
intercom.
NOTE: You may need to press CHAN
more than once to find an interference-free
channel.
I
OPTIONAL HEADSET INSTALLATION AND-OPERATING INSTRUCTIONS
( 1
Your 917ADXcordless telephone is equip-
ped with a 2.5mm Headset Jack for use with
an optional accessory Headset for hands-
free operation
1
If you choose to use the Headset option,
you must do the following:
INSTALLATION
Obtain an optional accessory Headset,
which is compatible with the 917ADX.
In the U.S. please contact VTech Communi-
cations Customer Service, toll-free at 1-800-
595-9511, in Canada call VTech Electronics
at 1-800-267-7377 for dealer information in
your local area. You can also purchase a
,
compatible Headset directly from VTech Com-
munications Customer Sewice.
Once you have a compatible 2.5mm Head-
set, locate the Headset Jack on the Handset
of your 917ADX. Connect the plug on the
Headset to the jack on the cordless Handset.
The plug should fit securely. Do not force the
connection. See illustration.
CLIP LOCATION
The 917ADX is also equipped with a
detachable belt clip. Align the pins on the
inside edge of the belt clip with the notches
on the side of the 917ADXhandset. The belt
i
clip should snap securely into place. Do not
force the connection. See illustration.
1
1
1
NOTE: Whenever a compatible Headset
is connected to the cordless Handset, the mi-
crophone on the Handset will be MUTED.
1 .
This is done to limit the effect of background
!
i
noise.
The following operational characteristics
I
I
apply to VTech Headsets. The same may
also apply to other (non-VTech) compatible
headsets, but VTech assumes no responsibil-
ity for their performance.
can wear your Headset on either the left or
right ear, leaving one ear free for room con-
versation
The headband can be adjusted to fit the
contour of your head. Using both hands,
Advertisement
Table of Contents
