Clr/Del Key Function; Advanced Dialing - VTech VT 1962 User Manual

ADVANCED FUNCTIONS

CLR/DEL Key Function

The CLEAR and DELETE functions
can be accessed separately depending
on how long the key is held down. For
example, to clear the last digit entered
on the display, press the CLR/DEL
key for less than 1 second. Press and
hold the CLR/DEL key for more than
1 second to completely clear the LCD.
The DELETE function is also used to
delete CID and memory dial records,
see DELETING STORED NUMBERS,
and DELETING NUMBERS.

Advanced Dialing

There are two different ways to dial a
number:
1. Press PHONE key and wait for
a dial tone. Then dial the number
you want either manually, using
MEMORY (MEM) dialing, CID
dialing or REDIAL.
OR
2. Enter the number you wish to dial
on the display first. Then press
PHONE key. This will dial the
number which is displayed on the
LCD after 2 seconds.
NOTE: The phone will dial any
number which is shown on
the display. If you do not
want to dial the number
shown on the LCD, it can be
changed by:
• Press and hold CLR/DEL until
the display is cleared, then dial
normally.
or
• Press OFF and start over.
24