Table of Contents
Advertisement
Quick Links
INTRODUCTION
Congratulations! You have purchased
one of the most sophisticated cordless
telephones on the market. The VT
1421 has been designed to offer a new
standard in cordless telephone
technology
Unlike most other cordless phones, the
VT 1421 digitizes your voice using
advanced ADPCM digital voice
encoding to provide noise and
distortion-free performance. In most
conditions, you will not be able to tell
you are using a cordless phone. Gone
are the annoyances of static,
interference and having to listen to
other conversations on your cordless
telephone.
The VT 1421 scrambles your voice
before it transmits. This allows you the
security of knowing that no one can
eavesdrop on your conversations.
The VT 1421 decodes and displays
name and/or number Caller ID
information where available and when
the service is subscribed to.
alphanumeric display can show both
the name and number of the calling
party. Up to 15 name characters or
12 phone number digits (including
spaces) can be displayed.
With the VT 1421, the user can easily
answer a call simply by pressing any
key other than the OFF key.
addition, the handset keypad and
display illuminate while the handset
rings to signal an incoming call. This
is very useful in a dark environment.
The VT 1421 uses special memory
which is not susceptible to power
failures.
storage of all memory dial numbers,
Caller ID information, and security
codes.
When an optional battery pack is
installed in the base unit, the VT 1421
uses this battery to provided operational
backup in case of power failure. In this
way you have access to handset
functions during total power outage.
Calls can still be placed and received
on the handset without interruption. Up
to 5 hours of backup will be possible
with a fully charged battery pack in the
base unit.
The VT 1421 informs you when another
extension is currently in use on the
same phone line. The phone will also
alert you when you are Out of Range,
even when you're not on the phone!
The VT 1421 has a very unique and
compact design. Using the provided
The
beltclip, you can easily carry the
handset clipped to your belt or even in
a shirt pocket. Also, if you connect an
optional headset to the 2.5mm headset
jack on the VT 1421, you can have
completely hands-free conversations.
In
1
This provides permanent
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for VTech VT 1421
Summary of Contents for VTech VT 1421
-
Page 1: Introduction
Up to 15 name characters or 12 phone number digits (including spaces) can be displayed. With the VT 1421, the user can easily answer a call simply by pressing any key other than the OFF key. addition, the handset keypad and display illuminate while the handset rings to signal an incoming call. -
Page 2: Special Features
Caller ID and memory dial records. • Wall mountable base unit. • 2.5mm Headset Jack for hands- free operation. This manual is designed to make you familiar with the VT 1421. We strongly recommend you read the entire manual before using your phone. -
Page 3: Parts Checklist
Parts Checklist 1. Handset 2. Base Unit 3. Wall Mounting Bracket 4. AC Adapter 5. Battery Pack To purchase replacement battery packs, call VTech at 1-800-595-9511. Handset AC Adaptor MEMORY DIALING • • • • • • • • •... -
Page 4: Fcc Regulations
This equipment is compatible with inductively coupled hearing aids. Should you experience trouble with this telephone equipment, please contact VTech at 1-800-595-9511 for warranty and/or repair information. The Telephone Company may ask you to disconnect this equipment from the line network until the problem has been corrected. - Page 5 5.0A total; however, contact your local telephone company for the specific number in your area. Your VT 1421 is designed to operate at the maximum power allowed by the FCC. This means your handset can communicate with the base unit only...
-
Page 6: Important Safety Instructions
Incorrect reassembling can cause electric shock when the appliance is subsequently used. 11. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. call VTech... -
Page 7: Save These Instructions
12. Unplug this product from the wall outlet and refer servicing to VTech Communications at 1-800-595- 9511, under conditions: • When the power supply cord or plug is damaged or frayed. • If liquid has been spilled into the product. -
Page 8: The Battery Pack
THE BATTERY PACK Charging the Handset Battery Pack The handset of your VT 1421 cordless telephone is powered by a rechargeable battery pack. It charges automatically whenever the handset is in the base. You should charge the battery pack for 16 hours when you first receive your phone. - Page 9 16 hours. CAUTION: To reduce the risk of fire or injury to persons, read and follow the instructions below. Use only VTech rechargeable battery pack. Do not dispose of the battery in a fire. The cell may explode. IMPORTANT: Do not dispose of this battery in household garbage.
- Page 10 Power Backup Function When a spare battery pack is installed in the base unit, the VT 1421 uses this battery pack to provide operational backup in case of a power failure. If you have a fully charged battery pack...
-
Page 11: Getting Started
Setting up Your VT 1421 Choose an area near an electrical outlet and a telephone wall jack. AC Power Adapter Plug the AC power adapter into an electrical outlet and the DC connector to the back of the base unit. - Page 12 Plug one end of the telephone cord into a wall jack and the other end into the back of the base unit. If the VT 1421 does not detect that an active telephone line cord is connected, the following message will be displayed: Check for a dial tone.
-
Page 13: Wall Mounting
The Wall Mounting bracket is designed to fit on standard Wall Mounting plates. Choose a spot near an electrical outlet and a telephone jack. Your phone requires a modular telephone jack (120v AC). The power cord is six feet long; make sure there is an electrical outlet within reach of the base. -
Page 14: The Handset Layout
THE HANDSET LAYOUT 2.5MM HEADSET JACK PHONE / FLASH key VOLUME / MENU DOWN key TONE (Temporary Tone) RETRACTABLE ANTENNA DISPLAY OK key OFF key VOLUME / MENU UP key DIALING keys (0-9) PAUSE key PAUSE k DELETE key MICROPHONE CHARGING CONTACTS... -
Page 15: Message Waiting Indicator
MEMORY DIALING • • • • • • • • • • • • • • • • • • • • • • SPARE BATTERY CHARGE COMPARTMENT MEMORY DIALING CARD POWER indicator PAGE key SPARE BATTERY indicator IN-USE/CHARGING indicator MESSAGE WAITING indicator... -
Page 16: Base Unit Features
BASE UNIT FEATURES Status POWER When the POWER LED is lit solid RED, it indicates that there is power to the base unit. IN USE (off hook) When the IN USE/CHARGING LED is lit solid GREEN it indicates that the phone is currently IN USE. RINGING The IN USE/CHARGING LED flashes GREEN in cadence with an incoming call. -
Page 17: Mute Microphone
Handset Menu Operation On Hook Stage OK key REDIAL MEMORY • Use Redial (p.20) SET UP • Set Ring Type (p.27) • Set Ring Volume (p.27) • Set Dial Type (p.28) • Set Keyclick (p.28) CLEAR MEMORY • Clear VMWI (p.25) •... -
Page 18: Setup
QUICK REFERENCE GUIDE Setup • Plug AC adapter into a standard electrical outlet and base unit. • Let handset battery pack charge for 16 hours before first use. • Set TONE/PULSE selection from SETUP menu. • Connect the telephone line cord to the base unit and telephone jack. -
Page 19: Dialing From Memory
S01. You will see the following LCD message: After the Speed Dial Location is deleted, the VT 1421 will return to Speed Dial Memory review mode. You can also delete the entire contents of the Speed Dial Memory. -
Page 20: Caller Id
REDIAL memory, for example: • Once you have found the number you want to dial press the PHONE key. FLASH You can use your VT 1421 with services such as Call Waiting. Simply press the PHONE key to FLASH the line. -
Page 21: Caller Id
New Call Counter As above, The VT 1421 keeps track of new Caller ID records. For example: The above display indicates that three new Caller ID records have been received since you last reviewed your... -
Page 22: Reviewing Caller Id Memory
CALLER ID Reviewing Caller ID Memory The VT 1421 stores up to 50 Caller ID records in memory. Using the you can sequentially scroll through the Caller ID records. • To view information stored in Caller ID memory, press the OK key to activate the menu. -
Page 23: Special Message Indicators
Special Message Indicators Occasionally, errors may occur when Caller ID data is transmitted from your Telephone Company. If this happens, the VT 1421 may display the following message: The occasional appearance of CALL ID ERROR on your VT 1421 display does not indicate a problem with your unit or telephone line. - Page 24 To proceed with the deletion, press the 0 key again. You will see the following LCD message: After the Caller ID record is deleted, the VT 1421 will return to Caller ID review mode. You can also delete the entire contents of the Caller ID memory.
-
Page 25: Advanced Functions
FLASH the line. To return to the original call, press the PHONE key again. Message Waiting Your VT 1421 is capable of detecting a Visual Message Waiting Indication, generated by many telephone service providers. If you subscribe to Voice... -
Page 26: Ear Piece Volume Adjustment
As you press the keys, the volume indicator will increase or decrease accordingly. Extension In Use Indication When another telephone on the same line is currently in use, the VT 1421 displays the following message: Then Headset Jack The VT 1421 has a standard 2.5mm headset jack. -
Page 27: Setup Mode Options
SETUP MODE OPTIONS The VT 1421 has four user configurable setup options which are accessible through the menu. Set Ring Type The VT 1421 has four programmable ringer tones, and the option to turn OFF the ringer. The default ringer setting is ring type 1. -
Page 28: Dial Type Selection
• Press OFF to exit. Keyclick Selection The VT 1421 can be set to generate a brief tone (or Keyclick) every time a key is pressed. This setting can be set to be either On or Off. The default setting is Keyclick On. -
Page 29: Maintenance
Taking Care or Your Telephone Your VT 1421 cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the headset down gently. Save the original packing material to protect your telephone if you ever need to ship... -
Page 30: Warranty
At our option, repair or replace your unit. HOW DO I SEND MY UNIT, IN OR OUT OF WARRANTY? • Call VTech Communications customer service for Return Authorization at : • Properly pack your unit. Include any cables & accessories, which were originally provided with the product. -
Page 31: Technical Specifications
FREQUENCY CONTROLL Crystal Controlled Synthesizer TRANSMIT FREQUENCY Handset : 925.05 MHz to 927.75 MHz (all ten channels within this range) Base : 902.3 MHz to 905.0 MHz (all ten channels within this range) RECEIVE FREQUENCY Handset : 902.3 MHz to 905.0 MHz (all ten channels within this range) Base :... -
Page 32: Table Of Contents
TABLE OF CONTENTS Page INTRODUCTION ... 1 Special Features ... 2 Parts Check List ... 3 FCC REGULATIONS ... 4 IMPORTANT SAFETY INSTRUCTIONS ... 6 THE BATTERY PACK ... 8 GETTING STARTED ... 11 WALL MOUNTING ... 13 THE HANDSET LAYOUT ... 14 THE BASE UNIT LAYOUT ... - Page 34 Is a trademark of VTECH COMMUNICATIONS LTD.., a member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTECH Communications, Beaverton, Oregon. Distributed in Canada by VTECH Electronics Canada Ltd., Suite 200 - 7671 Alderbridge Way Richmond, B.C. V6X 1Z9. Copyright 1996 for VTECH COMMUNICATIONS LTD..
Need help?
Do you have a question about the VT 1421 and is the answer not in the manual?
Questions and answers