Getting Started - VTech VT 1962 User Manual

GETTING STARTED

Setting Up Your VT 1962
Choose an area near an electrical
outlet and a telephone wall jack.
AC Power Adapter
Plug the AC power adaptor into an
electrical outlet and the DC connector
to the back of the Base Unit.
TELEPHONE
WALL JACK
CAUTION:
Use only CLASS 2 9V DC POWER
SUPPLY included with your phone.
Handset Ringer
The Handset ringer is programmed ON
as the factory default setting. Refer to
PROGRAMMING THE RINGER on
page 22 for more information.
Setting the Tone/Pulse Switch
The TONE/PULSE switch is located on
the bottom of the Base Unit and is
factory set to TONE. If you have touch
tone service, do not change the switch
setting. If you have rotary (Pulse)
service, set the switch to PULSE.
AC
OUTLET
Charge the Handset battery pack
before use. The battery pack recharges
automatically whenever the Handset is
in the Base Unit. The batteries must
be charged for 16 hours before using
your phone for the first time.
Charge the
Handset
Battery Pack
for 16 hours
before using
13
Tone/Pulse Selector
CHARGI
MA
DELETE
REPEAT