Memory Dialing; Storing Speed Dial Numbers - VTech VT 1920C User Manual

MEMORY DIALING

Storing Memory (Speed) Dial
numbers
To program a speed dial location, do
the following:
• With the phone OFF, enter the
telephone number you wish to
store. (20 Digits Maximum).
• Enter program mode by pressing
PROG. The display will show the
following:
• Enter the memory location (01..20)
you wish to store the number in.
As soon as the second memory
location digit is entered, the unit
will emit a happy tone (a short
series of beeps) to confirm
successful programming and exit
program mode.
STORING SPEED DIAL
FLASH
PAUSE
PHONE
OFF NUMBERS
HOLD
1 2 3
DIAL YOUR PHONE
6
4 5 NUMBER
7 8 9
PRESS
0 #
*
PRESS LOCATION
MEM CID REDIAL
(01-20)
CLR/DEL
PROG MUTE
If programming is unsuccessful the
unit will display:
1920manual
Unsuccessful programming can result
from not correctly completing the
programming sequence. For example,
if after entering a number on the LCD
and entering program mode, the OFF
key were pressed instead of entering
a valid memory location, the
"PROGRAMMING INCOMPLETE"
message
message appears, simply repeat the
programming sequence.
PROG
25
25
would appear. If this
1/28/99, 3:28 PM