VTech VT 1920C User Manual page 14

GETTING STARTED
Check for a dial tone. After the battery
pack is charged, rotate the Base Unit
antenna to an upright position. Pick up
the Handset and press PHONE
"PHONE ON" will appear on the LCD,
and you will hear a dial tone. If not,
see 'IN CASE OF DIFFICULTY' on
page 34.
Fill in the telephone number card on
the base unit.
FILL IN THE
TELEPHONE
NUMBER
CARD
MEMORY
1
2
3
4
5
6
7
8
9
10
CAUTION:
1. Never install telephone wiring
during a lightning storm.
2. Never install telephone jacks in wet
locations unless the jack is
specifically designed for wet
locations.
3. Never touch uninsulated telephone
wires or terminals unless the
t e l e p h o n e l i n e
disconnected at the network
interface.
4. Use caution when installing or
modifying telephone lines.
1920manual
.
h a s b e e n
14
14 1/28/99, 3:27 PM