Table of Contents
Advertisement
Tour with Vehicle Kit User Guide
10. If you selected No DHCP, enter the IP Addresses . Note that until all the required IP addresses
have been properly entered, you will be unable to proceed .
a. Enter the Radio IP Address (the IP address that will be assigned to Tour) .
b. Tap the box and enter the Network Mask .
c. Tap the box and enter the Gateway Address .
d. Tap the box and enter the DNS Address . If all IP addresses have been entered correctly, the
Go button will become enabled . Tap the Go button .
11. At the Confirm Settings screen, confirm that all the information that you entered is correct . If
not, tap the Reconfigure button . If correct tap the OK button .
System Settings
87
Advertisement
Table of Contents
