Wi-Fi Connection
To receive all the content that Tour is capable of delivering, Tour needs to be connected to a Wi-Fi
hotspot or Wi-Fi network with Internet access for Internet streaming content . Please note that data
rates may apply for Internet streaming when utilizing a hotspot . You are responsible for any carrier,
data and other related fees or charges that may be incurred from your carrier or service provider .
Wi-Fi Connection manages the Wi-Fi settings and connections . Wi-Fi can be turned on or off, a
connection made with a Wi-Fi network, and previous Wi-Fi connections can be forgotten . Each are
described in the following sections .
Turning Wi-Fi On and Off
If you wish to connect the Tour to a Wi-Fi network, Wi-Fi will need to be on, which is the default
setting . However, if not using Wi-Fi, or you do not want Tour to connect to a previously connected
Wi-Fi network, Wi-Fi can be turned off .
1. To turn Wi-Fi on or off, tap the Settings
2. Tap the Manage Settings button on the System Settings panel .
3. Swipe left to the Wi-Fi Connection panel .
4. On the Wi-Fi Connection panel tap the On/Off slider to turn Wi-Fi on or off .
Connecting to a Wi-Fi Network
There are two ways to connect to a Wi-Fi network: Scan or Manual . Most every Wi-Fi connection will
use the Scan method, where Tour scans for Wi-Fi networks and returns a list where a Wi-Fi network
may be selected .
In rare instances a Wi-Fi network may not advertise itself, and therefore cannot be found by scanning
for Wi-Fi networks . Tour allows you to manually enter all the Wi-Fi network information and connect .
You will need all the Wi-Fi network details from the network administrator .
The following two sections provide instructions for both methods of connecting to the Wi-Fi network .
Connect to a Wi-Fi Network Automatically (Scan)
To connect to a Wi-Fi hotspot or Wi-Fi network, refer to
23
for instructions .
84
button .
"Connecting Tour to the Internet" on page
Tour with Vehicle Kit User Guide