Changing Lan Ipv4 Address - D-Link DVG-5402G Quick Installation Manual

DVG-5402G/GF

Changing LAN IPv4 Address

This configuration step is available for the Access point, Repeater and
Client modes.
1. Select the Automatic obtainment of IPv4 address to let DVG-
5402G/GF automatically obtain the LAN IPv4 address.
2. In the Hostname field, you should specify a domain name of the router
using which you can access the web-based interface after finishing the
Wizard. Enter a new domain name of the router ending with .local or
leave the value suggested by the router.
In order to access the web-based interface using the domain name, i n
!
the address bar of the web browser, enter the name of the router with a
dot at the end.
Quick Installation Guide
30