Chain Dialing; Find Handset - VTech LS6115-2 User Manual

•

Chain dialing

can be useful
if you wish to
access numbers
other than phone
numbers (such
as bank account
information or
access codes)
from the directory,
call log or redial
list.
12
Telephone operation
Chain dialing
This feature allows you to initiate a dialing sequence from numbers stored in
the directory, call log or redial list while you are on a call.
To access a number in the directory:
1. Press MENU/SELECT twice to enter the directory menu.
2. Scroll by pressing
Press MENU/SELECT to dial the desired number when it is displayed.
3.
To access a number in the call log:
Press MENU/SELECT and then press
1.
Press MENU/SELECT to confirm.
2.
3. Scroll by pressing
Press MENU/SELECT to dial the desired number when it is displayed.
4.
To access the last number in the redial list:
• Press REDIAL/PAUSE to dial.
Press REDIAL/PAUSE again within two seconds to cancel the chain dialing.
•

Find handset

This feature allows the telephone base to page all the handsets.
Press FIND HANDSET on the telephone base. All the handsets
1.
will ring and the screens display ** PAGING ** .
Press FIND HANDSET again on the telephone base to
2.
stop paging, or press
(0-9, #, * ) on the handset.
www.vtechphones.com
or to find the desired entry.
or to find the desired entry.
/FLASH,
or any dialing key
to select > CALL LOG.
** PAGING **