Table of Contents
Advertisement
Troubleshooting
Problem
I cannot dial out.
My handset beeps
and is not performing
normally.
The speakerphone
call quality is poor.
42
Suggestion
•
First, try all the above suggestions.
•
Make sure there is a dial tone before dialing. It is normal if the handset takes a second or two
to synchronize with the telephone before producing a dial tone. Wait an extra second before
dialing.
•
If the other telephones in your home are having the same problem, the problem is in the wiring
or local service. Contact your local telephone company (charges may apply).
•
Eliminate any background noise. Noise from a television, radio, or other appliances may cause
the telephone not to dial out properly. If you cannot eliminate the background noise, first try
muting the cordless handset before dialing, or dialing from another room in your home with
less background noise.
•
Make sure the power cord is securely plugged into the telephone base. Plug the telephone
base into a different working electrical outlet not controlled by a wall switch.
•
Move the handset closer to the telephone base. It may be out of range.
•
Reset the telephone base by unplugging the electrical power to the base. Wait for 15 seconds
and plug it back in again. Allow up to one minute for the cordless handset and the telephone
base to synchronize.
•
Other electronic products can cause interference to your cordless telephone. Try installing
your telephone as far away from these electronic devices as possible: wireless routers, radios,
radio towers, pager towers, cellular telephones, intercoms, room monitors, televisions, personal
computers, kitchen appliances and other cordless telephones.
•
For better call quality, we recommend that the handset be placed on a table with the dialing
keys facing up when using the speakerphone.
www.vtechphones.com
Advertisement
Table of Contents
