Table of Contents
Advertisement
Telephone operation
Transfer an external call
You can transfer an external call from one handset to another system handset.
For model LS6115-2
1.
During a call, press INT to put the call on hold at the originating handset. The
screen displays CALLING OTHER HANDSET.
2.
The destination handset rings and its screen displays
OTHER HANDSET IS CALLING.
3.
To answer the call at the destination handset, press
/FLASH,
, INT or any dialing key (0-9, #, * ) on the
destination handset.
4.
Now the party at the originating handset can have a
conversation with the party at the destination handset. Both
screens display INTERCOM.
Press OFF/CLEAR on the originating handset, or place
5.
it back in the telephone base or charger to transfer the
external call to the destination handset. The originating
handset displays CALL TRANSFERED.
If you wish to cancel call transfer during intercom mode and reconnect to the
external call:
/FLASH on the originating handset.
•
Press
-OR-
•
Press OFF/CLEAR or INT on the destination handset, or place it back in the
telephone base or charger.
www.vtechphones.com
•
CALLING
OTHER HANDSET
OTHER HANDSET
IS CALLING
•
INTERCOM
If the destination
handset does
not pick up the
intercom call,
the originating
handset can return
to the external call
by pressing
/FLASH,
OFF/CLEAR or
INT.
If a call remains
on hold for about
100 seconds, or
if the destination
handset is in the
directory, in the
call log, or out of
range, the screen
of the originating
handset shows
UNABLE TO
CALL TRY AGAIN
and reconnects to
the external call
automatically.
15
Advertisement
Table of Contents
