Table of Contents
Advertisement
Batteries
Battery care and performance
After the battery is fully charged, you can expect the following performance:
• If you repeatedly
get a low battery
indicator, even
after charging
overnight, the
battery should be
replaced .
• To reduce the
* Handset is off the base unit or charger but not in use .
risk of fire or
•
injury to persons
or damage to the
telephone, read
and follow these
instructions
•
carefully: Charge
the battery
•
provided with
Replace the handset battery
or identified for
use with this
. Remove the battery compartment cover on the handset by pressing on
product only in
accordance with
2 . Lift out the old battery and disconnect the plug from the compartment .
the instructions
3 . Align the two holes in the new battery's plug with the socket pins, and snap
and limitations
specified in the
user's manual .
4 . Replace the cover by sliding it up into place until it clicks .
5 . Place the handset in the base and allow it to charge for at least 6 hours
28
Operation
While in use (talking)
While not in use (standby*)
The battery needs charging when:
— A new battery is installed in the handset .
— The phone beeps twice every five seconds.
— The screen displays BATTERY LOW and the low battery icon
Place the handset in the base so the CHARGE light turns on . The battery is typically fully
charged after at least 6 hours .
You can keep the battery fully charged by returning the handset to the base after each use .
the indentation and sliding the cover downward .
the plug into place . Snap the battery in the compartment, as described
in Installation, on page 5 .
the first time. The telephone might operate before that, but for best
performance, let the battery charge fully .
www.vtechphones.com
Operating time
up to 5 hours
up to 5 days
.
1
3
4
Advertisement
Table of Contents
