Important Safety Instructions - Savio Uvinex Standard Operating Manual

Safety
Water and electricity can be deadly when combined. This unit can pose a significant
risk of bodily harm if used incorrectly. Please read the following instructions carefully.
• Never immerse the ballast/transformer unit in water.
• Never immerse the entire Uvinex™ system in water.
• UV must be used in conjunction with a ground fault current interrupter socket
(GFCI) (If you do not have a GFCI, contact a licensed electrician before using the
UV.)
•
If the UV's internal components get wet, unplug the unit immediately.
•
If the bulb shows signs of leakage unplug the unit immediately.
•
Do not operate UV with a damaged cord or plug, if it has been dropped, or is
malfunctioning.
•
Do not attempt repairs on a damaged transformer unit.
•
Always unplug the unit when not in use and prior to servicing it.
•
Always pull the plug from the outlet, never pull the cord.
UV Light Warning
•
Do not operate UV unless it is fully installed in the Savio Skimmerfilter®.
•
UV lamps emit radiation that is harmful to eyes and skin. Do not look directly at
UV while in operation.
•
UV lamps are made from glass and must always be handled with caution.
•
Closely supervise children around all pond equipment.
•
The Savio UVinex™ System is for use solely in Savio Skimmerfilters®. Do not use it
in any other environment.
6

Important Safety Instructions

WARNING - ELECTRICAL SHOCK HAZARD