Page 1
Great Equipment Is Just Part Of The Savio Excellence Line. Savio manufactures a full assortment of products for healthy Livingponds®. When you want to build it right the first time, think Savio. For the full line of Savio products visit www.savioeng.com _____________________________...
Installation At the top of the waterfall, prepare the The Livingponds Filter 070 includes two area for installation by excavating a 9” x 3” inlets (on either side of the housing). 34” x 6” deep hole. Compact the soil in the Select the unused side and apply glue to bottom of the hole to prevent unwanted the ABS plug (provided).
Page 5
Installation Place Filter into hole and level front to Connect inlet assembly to your pump or back and side to side. Tip the unit forward Skimmerfilter using flexible hose and hose clamp (provided). (toward the pond) slightly (about 1/4”) to compensate for settling.
Finishing Touches Remove grate and place mesh media Place both filter media pads into filter. bags into filter. Gently agitate to spread media evenly across. Replace media grate. Continue landscaping with rock work and plants to fully blend the Living- ponds®...
Rinse media in a bucket of pond water. Avoid using tap water, chlorinated water, soaps or chemicals as this can kill the beneficial organisms living on the media. Beneficial Bacteria Add Savio Natural Beneficial Bacteria to the filter mat during startup, and after each cleaning throughout the season. Winterization Prepare for winterization in mid-to-late November, or when ice persistently develops on the pond.
This warranty does not cover any faults caused by improper use, installation and handling of the device or as a result of wear and tear. Savio Engineering does not assume liability for consequential damage caused by the failure of the product.
Need help?
Do you have a question about the Livingponds F070 and is the answer not in the manual?
Questions and answers