Lamp Replacement - Savio Uvinex Standard Operating Manual

Lamp Replacement

Standard
Ru1805
RU2605
RU5005
High Output
RU2800HO
RU3500HO
RU5500HO
4
1. Remove Uvinex Clarifier from the SkimmerFilter
2. Wipe any water or pond debris from the unit
3. Unscrew RU119 Junction Screws and remove RU120 Junction Cap Top
4. Unplug transformer socket from Uvinex 4-prong UV bulb
5. Loosen (do not remove) RU122 Screw Ring until bulb moves freely
6. Gently twist old bulb and remove from RU121 Junction Cap – Bottom
7. Carefully insert new bulb though RU121 Junction Cap Bottom
8. Plug 4-prong UV bulb into transformer socket
9. Set bulb at proper depth by test fitting the Junction Cap Top
10. Snug (do not over-tighten) the RU122 Screw Ring to hold bulb in place
11. Install RU120 Junction Cap Top and seal with RU1119 Junction Screws
12. Reinstall Uvinex Clarifier in the SkimmerFilter