Table of Contents

Advertisement

Recommended Flow Rates
For water clarification, the pump needs to flow the total volume of the pond water past
the UV no less than every two hours. In full-size Skimmerfilters® two UVs may be used for
increased clarification.
18 Watt UVinex™ / 28 Watt High Output
Minimum 33% of the total volume of gallons per hour (gph)
Maximum 2000 gallons per hour (GPH)
26 Watt UVinex™ / 35 Watt High Output
Minimum 33% of the total volume of gallons per hour (gph)
Maximum 3000 gallons per hour (GPH)
50 Watt UVinex™ / 55 Watt High Output
Minimum 33% of the total volume of gallons per hour (gph)
Maximum 5000 gallons per hour (GPH)

Maintenance

Prior to performing any maintenance, always unplug the UVinex™ system. Use caution
when removing or replacing bulbs.
Every Three Months:
The coated bulb should be wiped with a clean cloth & rinsed with clean water.
Annually or As Needed:
Replace UVinex™ bulb every 12 months for optimal water clarity.
Winterizing
Allowing the UVinex™ system to freeze can result in breakage to the bulb.
Winterize pond equipment before ice develops on the pond. Keep equipment winterized
until Spring when the water temperature rises to 40F or higher consistently.
To Winterize UV:
1.
Disconnect electrical connections.
2.
Remove the UV from the Skimmerfilter®.
3.
Dry UV unit thoroughly and clean bulb.
4.
Store indoors in a safe place.
Specs and Maintenance
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents