Set Telephone Base Ringer Volume - VTech DS6121-2 User Manual

Answering system
Set number of rings (continued)
If you subscribe to caller ID/call waiting and voicemail service through your
telephone service provider, you can use your telephone answering system and
voicemail together. Set your answering system to answer calls at least two rings
earlier than your voicemail is set to answer. For example, set your voicemail
to answer calls after six rings and set your answering system to answer after
four rings. By doing this, if you are on a call, or if the answering system is busy
recording a message and you receive another call, the second caller can leave
a voicemail message.

Set telephone base ringer volume

This feature allows you to select the telephone base ringer volume level. You
can choose from HI (high), OF (off) or LO (low).
1.
Press /SKIP or /REPEAT until the system announces the desired telephone
base ringer volume level, then press SETUP to save the setting and go to the
next setting, or press
The handset ringer volume is set separately. See page 8 for details.
38
Press SETUP when the telephone is not in use until the system announces
the telephone base ringer setting.
www.vtechphones.com
/PLAY/STOP to save and exit setup mode.
38