Handset Layout - VTech DS6121-2 User Manual

Getting started

Handset layout

CHARGE light
• On when the handset is charging in the
telephone base or charger.
INT (intercom)
• Press to initiate an intercom conversation
or transfer a call.
/FLASH
• Press to make or answer a call.
• During a call, press to receive an incoming
call when you receive a call waiting alert.
/CID
• Press to review the call log when the
handset is not in use.
• While in the menu, press to scroll down.
/ SPEAKER
• Press to activate the handset speakerphone.
• Press again to resume normal handset use.
REDIAL/PAUSE
• Press to review the redial list.
• While dialing or entering numbers into the
directory, press and hold to insert a dialing
pause.
6 www.vtechphones.com
MUTE/REMOVE
• While on a call, press to mute microphone.
• While reviewing the call log, press to delete an
individual entry, or press and hold to delete the
entire call log.
• Press to delete digits when predialing (preview
numbers before dialing).
/ (Directory)
• Press to enter the directory when handset is
not in use.
• While in the menu, press to scroll up.
MENU/SELECT
• Press to display the menu.
• While in the menu, press to select an item,
or save an entry or setting.
OFF/CLEAR
• During a call, press to hang up.
• While the handset is ringing, press to silence
the ringer.
• Press and hold when the handset is not in use
to erase the MISSED CALLS display.
• During programming, press to exit without
making changes.
#
• Press repeatedly to display other dialing options
when reviewing a call log entry (page 30).