Greasing And Lubrication - Toro 79252 Operator's Manual

Greasing and Lubrication

Service Interval/Specification
Grease and oil the machine after every 25 operating
hours or once a year, whichever occurs first.
Grease Type: General-purpose grease.
Oil Type: SAE 10W or 10W30.
Grease Channel Pivot
1. Disengage the power take off (PTO), set the
parking brake, and turn the ignition key to
"OFF" to stop the engine. Remove the key.
2. Clean the area around channel pivot with a rag.
Apply grease to pivot bolt, frame and sector
(Fig. 20).
3. Wipe off excess grease.
Oil Linkages
1. Disengage the power take off (PTO), set the
parking brake, and turn the ignition key to
"OFF" to stop the engine. Remove the key.
2. Place a few drops of oil on all movable linkages
(Fig. 20).
3. Wipe off excess oil.
Figure 20
Maintenance
1473
15