Table of Contents
Advertisement
Operation
Adjusting Blade Index
The blade can be indexed side to side, in 5 positions.
The direction is controlled by the handle on the right
frame (Fig. 18).
1.
Squeeze the release lever toward the handle
(Fig. 18).
2.
Push or pull lever to change index position and
release lever. Index pin must snap into hole in
channel to retain position.
1
Figure 18
1. Handle
12
2
1477
2. Release lever
Adjusting Blade Trip Springs
The blade trip springs can be mounted in 4 positions.
The top hole provides greatest scraping pressure and
the lower hole least scraping pressure (Fig. 19).
1.
Remove hairpin cotter and slide rod out from
blade and springs (Fig. 19).
2.
Slide rod through springs and new hole position
in blade (Fig. 19).
4
2
Figure 19
1. Hairpin cotter
2. Rod
1
3
1237
3. Spring
4. Top hole
Advertisement
Table of Contents
