Basic Operation; Making Calls; Volume Control; Channel Changing - VTech VT 9122 User Manual

Vtech answering machine user manual

Hide thumbs Also See for VT 9122:

Table of Contents

BASIC OPERATION

While you are on a call, press

will display the relative volume setting as you adjust it.

If you experience noise or interference while on a call, you may be too far

from the Base Unit, or in an obstructed area. Try moving to a different

location. If this does not improve the transmission, press PROG/CHAN.

You can press this key more than once, if necessary.

NOTE: This feature only operates while you are on an active call.

Method 1------Live Dialing

Press PHONE. Dial the phone number.

Press OFF to end your call.

Method 2------Pre-dialing

There are 24 digit. Dial the phone number, up to 24 digits. Use the

DELETE key to backspace if you make a dialing mistake. Then

press PHONE.

Press OFF to end your call.

When the Handset is in use, the IN USE/CHARGE light on the

Base Unit will be ON. When the Handset is in the Base Unit cradle,

the IN USE/CHARGE light glows steadily.

to raise the inbound volume and

to lower it. The Handset

Table of Contents

Do you have a question about the VT 9122 and is the answer not in the manual?