Unpacking The 4-Post Rack Installation Assemblies - Lightspeed Systems Lightspeed Rocket Hardware Installation Manual

4.

Unpacking the 4-Post Rack Installation Assemblies

Verify that the ship kit includes the following items:
• Two power cords
• A set of 4-post rack mounting
(Eight) M5 x 12
Phillips flat head screws
• A pair of 4-post rack sliding chassis rail rack assemblies that attach directly to the rack.
Rack rail assembly, inside view
Rack rail assembly, outside view
Lightspeed Rocket Hardware Installation Guide
hardware*
(Eight) M5 x 12
cone washers
(Ten) M5
cage nuts
Adjustable front rack rail assembly
(attaches to the front of the rack)
(Two) 10-32 x 3/4"
Phillips pan head screws
(used to secure the appliance in the rack)
NOTE: Use the hardware supplied
with your specific rack if different
from the hardware supplied in
this kit.
NOTE: There may be additional
*
mounting hardware included
that will not be used with this
installation assembly kit.
Adjustable rear rack rail assembly
(attaches to the rear of the rack)
5