Selecting Image Source - Furuno 1722 Operator's Manual

1. OPERATIONAL OVERVIEW
1.5.4

Selecting image source

When more than one network radar or a blackbox echo sounder is connected to
the equipment you may select image source for each as shown below. This is not
necessary when only one network radar or echo sounder is connected.
1. Press the [DISP] key.
2. Press any soft key to show the following display.
3. Select RADAR SOURCE or SOUNDER SOURCE as appropriate and press
the EDIT key.
4. Enter host name with the [ENTER] knob.
5. Press the RETURN soft key to finish.
6. Press the [MENU] key to close the menu.
1-12
RADAR SOURCE
RADAR
SOUNDER SOURCE
ETR
IF THERE IS MORE THAN
ONE NETWORK RADAR OR
ECHO SOUNDER, YOU MAY
SELECT THE IMAGE
SOURCES FOR DISPLAY.
Select source menu
RADAR SOURCE
RADAR
Radar source
Radar source and sounder source windows
SELECT
SOURCE
EDIT
RETURN
SOUNDER SOURCE
SOUNDER
Sounder source