Advertisement
1992 Volvo 240
Engine B230F (2.3 liters; 141 cu. in.)
Liquid-cooled, gasoline, 4-cylinder in-line engine. Cast-iron cylinder block with cylinders bored directly
in block. Aluminum-alloy cylinder head with single overhead camshaft and separate intake and outlet
channels. Engine lubrication is provided by a gear pump driven from the crankshaft. Full-flow type oil
filter. Exhaust-emission control accomplished by fuel injection, Lambda-sond™ system and catalytic
converter.
Output (SAE J1349)
Max. torque (SAE J1349)
Number of cylinders
Bore
Stroke
Displacement
Compression ratio
Valve clearance, cold engine
inlet and exhaust
Valve clearance, warm
engine
inlet and exhaust
All specifications are subject to change without notice.
pg. 112 Specifications (cont.)
Engine B230F
Cooling System
Type Positive pressure, closed system
Thermostat begins to open at 188.6 ° F
Fan belts, designation HC-38-918 (two)
A/C belt, designation HC-38×850
file:///K|/ownersdocs/1992/1992_240/92240_109.htm (3 of 5)12/30/2006 9:31:38 AM
114 hp at 5400 rpm (85 kW at 90
rps)
136 ft. lbs. (185 Nm) at 2700 rpm
4
3.78" (96 mm)
3.15" (80 mm)
2.32 liters (141 cu. in.)
9.8:1
Checking:
Adjusting:
0.012-0.016"
0.014-0.016"
(0.30-0.40 mm)
(0.35-0.40 mm)
0.014-0.018"
0.016-0.018"
(0.35-0.45 mm)
(0.40-0.45 mm)
Advertisement
