Advertisement
1992 Volvo 240
NOTE: The jack in your car comes in two versions. If your car is equipped with the alternate version
(see illustration), the crank handle can be folded out by pressing the nob on the handle downward. To
attach the jack, refer to the illustration on the following page.
To avoid excessive tire wear and rebalancing, mark and reinstall wheels in same location and position
as before removal. To lessen the chance of imbalance, each wheel hub is equipped with a guide stud to
ensure that a removed wheel can be reinstalled in its original position.
Removal
Steel wheel: Grasp the wheel cover with both hands and pull off.
Alloy wheel: Pry the center emblem (if applicable) off with a screwdriver. The wheelcover can then be
removed by hand.
Loosen the wheel nuts 1/2-1 turn with the box wrench provided in the tool kit. All of the wheel nuts
have right-hand threads which are loosened by turning them counterclockwise.
Installation
file:///K|/ownersdocs/1992/1992_240/92240_094.htm (5 of 10)12/30/2006 9:31:35 AM
Alternate version of jack
Wheel cap removal (Optional wheel)
Advertisement
