Learning The Remote Control; Deleting All Codes; Using The Remote Control For Opening And Closing The Gate - Westfalia 82 63 73 Instruction Manual

Learning the Remote Control

1. For learning the remote control, press the LEARN button. The REM LED light
up.
2. Press one button on the remote control twice within 2 seconds. The REM
LED lights up for 4 seconds and indicates that the remote control has been
learned successfully.

Deleting all Codes

For deleting all codes press the LEARN button and keep it pressed until the REM
LED switches off. Now all codes are deleted.

Using the Remote Control for opening and closing the Gate

1. Press the button A on the remote control for the following
functions: Gate open – Stop – Gate close – Stop – Gate
open.
2. If the DIP switch settings 1 and 2 for normal run are
activated, press the button B for the following functions: the
gate will open according to the adjusted time.
If the DIP switch settings 1 and 2 for the normal run are not
activated, when pressing the button B the following func-
tions are possible: Gate open – Stop – Gate close – Stop –
Gate open.
3. When using the remote control from the car, hold the
remote control close to the wind screen and press the button A resp. B. in
order to open the gate. Always wait until the gate has come to a complete
standstill before moving in or out with the car.
Remote Control
20
LEARN-
Button
REM LED