7. Power up the system computer and verify that the frame grabber is
operational.
6.2.1 Tripod Mounting
The LD3500 series cameras can be supplied with an optional ¼-20 UNC tripod
mounting block that can be placed on any one of the 4 sides of the camera
housing. Be sure to use 3 screws when employing the tripod mount.
6.3 Activating the Camera
Place the test target within the cameras' projected field of view and turn on the
illumination source.
Orient the test target such that the black and white Focusing Bars are directly
below the camera and are aligned with the sensor array X direction as shown in
Figure 11.
Figure 10 Test Target
19
PerkinElmer™ ™ Optoelectronics