Table of Contents
Advertisement
5.6 Frame Grabber Interface Guidelines
The LD3500 series cameras have been designed for use with several brands of
frame grabber. It is the users responsibility to select a frame grabber that is
specific to the application being served and support the RS-644 or Camera Link
interface signals. When choosing a frame grabber, the following points must be
observed:
1. Camera model (for number of pixels in sensor array).
2. Camera exposure mode. Slave modes require external input signals. See
section 4.
3. The frame grabber must be able to accept differential digital video, either
parallel LVDS or Camera Link base configuration
Contact PerkinElmer for a list of recommended frame grabber vendors.
5.7 Cleaning the Sensor
Should the sensor become dirty the user can clean the face taking care to use
Isopropyl Alcohol only.
Caution: Do not allow any of the cleaning solution to contact any internal
components, sensor pins or connector pins.
Caution: Do not remove the cover over the sensor, or the faceplate. There
are no user serviceable parts inside.
PerkinElmer™ ™ Optoelectronics
17
Advertisement
Table of Contents
