Line Period Limits; Camera Exposure Modes (Lvds Model); Figure 4 Slave Mode Timing (Camera Link Model); Table 1 Line Period Limit Definition (Camera Link Model) - PerkinElmer RETICON LD3500 Series Instruction Manual

Figure 4 Slave Mode Timing (Camera Link Model)

4.1.4 Line Period Limits

Table 1 Line Period Limit Definition (Camera Link Model)

Model
LD3521
LD3522
LD3523
LD3541
LD3542
LD3543

4.2 Camera Exposure Modes (LVDS Model)

The following exposure modes are provided:
The camera mode is automatically detected on the LVDS model.
Note: The camera defaults to master mode on power up. If an external LT signal
is detected the camera will go into slave mode. If an unintentional LT signal
is supplied, the camera must be powered down and restarted to restore the
camera to master mode.
# Pixels Clock Max Line Scan
512 20 MHz 34,364 L/sec
1024 20 MHz 18,281 L/sec
2048 20 MHz
512 40 MHz 68,728 L/sec
1024 40 MHz 36,563 L/sec
2048 40 MHz 18,885 L/Sec
•
Master Mode
•
Slave Mode
7
Min. Line
Rate Scan Period
29.1 µsec
54.7 µsec
105.9 µsec
9,442 L/sec
14.6 µsec
27.4 µsec
53.0 µsec
PerkinElmer™ ™ Optoelectronics