Table of Contents
Advertisement
Figure 9 LD3500 Series Camera Mounting Hole Location
Note:
For best thermal stability, mount the camera to a flat metal surface using the
faceplate holes.
5.4 Connecting Power
Warning: It is the buyers responsibility to comply with all applicable code
requirements.
5.4.1 Power Supply Requirements
The power supply must provide at the camera:
5.4.2 Power Supply Connector
The LD3500 camera receives its power from a 6-pin Hirose HR-10A circular
connector. The power connector is common to both models.
PerkinElmer™ ™ Optoelectronics
+12 to +24 VDC
6 W total input power
Table 4 Power Connector Pin Assignment
Signal
Pin
12-24VDC
1
12-24VDC
2
N/C
3
N/C
4
COMMON
5
14
Description
Input Voltage
Input Voltage
No Connection
No Connection
Input Voltage Return
Advertisement
Table of Contents
