Table of Contents
Advertisement
Recoil-start Handle
To start the engine, pull the recoil-start handle (Figure 7).
Engine On/Off Switch
The On/Off switch (Figure 12) allows the operator of the
machine to start and stop the engine. This switch is located
on the front of the engine. It is marked l (On) and O (Off).
Rotate the On/Off switch to the On position to start and run
the engine. Rotate the On/Off switch to the Off position to
stop the engine.
Specifications
Note: Specifications and design are subject to change without notice.
Width (without screed board)
Length
Height (without screed board)
Weight (without screed board)
Maximum screed board width
VS-70
70.0 cm (27.5 inch)
119.4 cm (47.0 inch)
73.7 cm (29.0 inch)
11.3 kg (25.0 lb)
3.7 m (12.0 ft)
9
Figure 12
VS-80
89.0 cm (35.0 inch)
56.0 cm (22.0 inch)
122.0 cm (48.0 inch)
14.5 kg (32.0 lb)
4.9 m (16.0 ft)
g021471
Advertisement
Table of Contents
