Table of Contents
Advertisement
Operation
Important: Before operating the machine, check the
fuel and oil levels, and remove debris from the machine.
Preparing to Use the Machine
•
Review all of the safety decals on the machine.
•
Use a hard hat, hearing protection, tight-fitting gloves
without drawstrings or loose cuffs, and eye protection.
A mesh visor alone does not provide sufficient eye
protection; supplement with protective glasses.
•
Ensure that you are familiar with safety regulations and
the shutdown procedures described in the Operator's
Manual and the Engine Manual.
•
Ensure that all guards are in place and in good condition.
•
Ensure that the screed board is in good condition, aligned
correctly and secured to the machine.
•
Check the fuel and oil levels of the engine.
Operator Positions
You must be familiar with three positions when using the
machine.
•
Use the operating position (Figure 13) when running the
machine to screed concrete.
Figure 13
•
Use the resting position when leaving the machine.
(Figure 14). Never leave the engine running while the
machine is in the rest position. Always set the machine
on a flat surface.
g021642
10
Figure 14
g021643
Advertisement
Table of Contents
