Advertisement
TEMPUR® Ardennes and Moulton Standard Divans,
and Headboards
Installation & Assemby Instructions
Fitting Castors – Unpack the base (both halves where
applicable), lay base upside down and take off attached bag
containing castors, linking bars, bolts and headboard bolts.
Place castor into the insert as shown...
Linking – Turn the bases over on to castors. Place both halves
of the base next to each other and fit silver linking bar to the
head (top) end. Fasten bolts tightly as shown...
Then repeat at foot (bottom) end of the base ....
Attaching Headboards – When fitting headboards pierce the
fabric beneath the stickers which mark where the headboard
bolt holes are. Check the bolts can thread correctly by screwing
them into the hole.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TEMPUR Ardennes Headboard
Summary of Contents for TEMPUR Ardennes Headboard
- Page 1 TEMPUR® Ardennes and Moulton Standard Divans, and Headboards Installation & Assemby Instructions Fitting Castors – Unpack the base (both halves where applicable), lay base upside down and take off attached bag containing castors, linking bars, bolts and headboard bolts. Place castor into the insert as shown…...
- Page 2 Attaching Headboards - Things To Note: Fitting a headboard is always easier with two people. Some models may have wooden blocks or spacers in addition to the long headboard bolts. If they do, these go in between the divan base and the headboard. This is often found on adjustable base units where they provide clearance for the mattresses as they are raised and lowered on the mechanisms.
Need help?
Do you have a question about the Ardennes Headboard and is the answer not in the manual?
Questions and answers