Getting Started - Scansonic R3 User Manual

Getting Started

Carefully remove your Digital Radio from the box. You may wish to store the packaging for future use.
In the Box
Inside the box you will find:

Main Unit

Power Adapter

User Manual
Positioning your Radio
Place your Digital Radio on a flat / stable surface that is not subject to vibrations.
Avoid the following locations:

Where the radio will be exposed to direct sunlight.

Where the radio will be close to heat radiating sources.

Where the humidity is high and ventilation is poor.

Where it is dusty.

Where it is damp or there is a possibility of water dripping or splashing onto unit.
Adjusting the Antenna
The antenna should be extended to ensure you receive the best reception possible in both DAB and FM radio
modes. It may be necessary to alter the position of the Digital Radio and /or antenna to achieve the best
signal.
Turning the Unit On/Off
Connect the plug at the end of power adapter cable to the DC in jack on the back of the unit. Then insert the
power adapter into the mains socket. Turn the mains power on and then press the
unit, press the button again to switch radio to standby mode. To switch the unit off completely, unplug
the power adapter from the mains socket.
Volume Control
Adjust the radio volume by turning Scroll/Select knob.
While a DAB/FM program is playing, press Vol button to activate volume adjusting function of Scroll/Select
knob first.
button to turn on the
7