Download Print this page

Loading A Disc; Soft Button Controls; Monitor Controls - Vizualogic A 1150 Owner's Manual

All-in-one headrest monitor/dvd system
Hide thumbs

Advertisement

Table of Contents
CONTRAST
BRIGHTNESS
DIMMER
RESET DEFAULT
Once the desired selection has been made, use the
the function setting.
6.
(UP) – Increases volume output of wired headphone jack. When in MENU
mode also increases the value of the desired function.
7.
(DOWN) – Decreases volume output of wired headphone jack. When in
MENU mode also decreases the value of the desired function.

Loading a Disc

To open/reveal the DVD loading
slot, PRESS on the top-center of
the monitor frame (indicated by
the Vizualogic logo).
NOTE: Do not put pressure
directly on the screen. Latch
the monitor in the fully closed
position when DVD loading slot
is not in use.
1. EJECT – Press this
button to eject the disc.
1
2. Disc Slot
2
3. LCD Panel
3
To load a disc, insert the the disc
vertically with the label surface
facing the rear of the vehicle.
Gently lower the disc into the disc
slot, until the loader motor accepts
the disc and lowers it into the DVD player. Once the disc has been loaded,
press on the monitor frame to conceal the DVD loading slot.
6
COLOR
TINT
SHARPNESS
or
buttons to change
A-1250 Monitor On-Screen Functions

SOFT BUTTON CONTROLS

When any of the DVD / Monitor Control buttons are pressed, a row of icons will
appear directly above the buttons. To alternate between DVD and Monitor
Control functions, momentarily press the POWER / TOGGLE button. To perform
a desired function, press the button directly underneath the desired icon.

MONITOR CONTROLS

(UP) – Increases volume output of wired headphone jack. When in MENU
mode also increases the value of the desired function.
(DOWN) – Decreases volume output of wired headphone jack. When in
MENU mode also decreases the value of the desired function.
MENU – Accesses monitor picture adjustment settings. Each press of the MENU
button advances through the functions as follows:
CONTRAST
BRIGHTNESS
COLOR
DIMMER
RESET DEFAULT
Once the desired selection has been made, use the
the function setting.
SOURCE – Changes the source displayed on the monitor. Each press of the
SOURCE button changes the source in the following sequence:
Dual DVD system:
DRIVER DVD
PASSENGER DVD
Single DVD system:
DRIVER DVD
EXT AUX
AUX
ZOOM – Changes the size of the image displayed on-screen from wide, normal,
or zoom
TINT
SHARPNESS
or
buttons to change
EXT AUX
AUX
7

Advertisement

Table of Contents
loading

  Also See for Vizualogic A 1150

  Related Manuals for Vizualogic A 1150

This manual is also suitable for:

A-1250