Remote Control Operations - Vizualogic A 1150 Owner's Manual

All-in-one headrest monitor/dvd system
Hide thumbs Also See for A 1150:
Table of Contents

Advertisement

Remote Control Operations

NOTE: The remote control will control all Monitor and integrated DVD functions.
The remote is not a fully universal remote control and is only guaranteed to
work with Vizualogic products.
MONITOR FUNCTIONS
1. MONITOR POWER – Press
this button to turn the monitor
ON. The current video source
will be displayed on-screen, and
within a few seconds the picture
will appear. Press the button
again to turn the monitor OFF.
2. SOURCE SELECT – All video
sources connected to the AV
inputs can be viewed on the
monitor by pressing this
button. Each time the button is
pressed, the AV source will
change in the following
sequence: DRIVER DVD,
PASSENGER DVD (if equipped)
EXT AUX, AUX.
3. UP – Shifts right or up OSD
menu. Increases the value of
CONTRAST, BRIGHTNESS,
COLOR, TINT, SHARPNESS or DIMMER.
4. DOWN – Shifts left or down OSD menu. Decreases the value of
CONTRAST, BRIGHTNESS, COLOR, TINT, SHARPNESS, or DIMMER.
5. PICTURE Press this button to adjust the value of CONTRAST,
BRIGHTNESS, COLOR, TINT, SHARPNESS, or DIMMER.
6. ZOOM – Selects the screen among wide/normal/zoom.
7. FM SOURCE SELECT – While aiming the remote at the Driver Side Monitor,
press this button to turn on the Frequency Modulator. Press this button
repeatedly to change the Frequency Modulator's audio source between
DRIVER DVD, PASSENGER DVD, EXT AUX, and FM OFF.
8. FREQUENCY SELECT – While aiming the remote at the Driver Side Monitor,
press this button to select the desired Frequency Modulator channel.
10
2
1
SOURCE
SOURCE
MONITOR
FM
5
ZOOM
FREQ
PICTURE
RETURN
6
MENU
SETUP
ENTER
TITLE
PLAY
PAUSE
STOP
PREV
FR
FF
NEXT
SLOW
1
2
3
REPEAT
4
6
5
7
8
9
DISP.
SUB
0
A-B
GO
TITLE
MUTE
ZOOM
AUDIO
PBC
DVD FUNCTIONS
9. UP – Moves up within the
DVD SETUP menu.
3
10. DOWN – Moves down
7
within the DVD SETUP
8
menu.
4
11. RIGHT – Moves right within
the DVD SETUP menu.
12. LEFT – Moves left within the
DVD SETUP menu.
13. ENTER – Confirms a
selection.
14. RETURN – Return to
previous menu screen or
playing point.
15. SETUP – Navigates SETUP
MENU. There are 4 pages to
configure System
(1) General Setup
(2) Audio Setup
(3) Video Setup
(4) Password Setup.
16. MENU – Goes to the Root Menu on the disc.
17. TITLE – Navigates the Title Menu on the disc.
SOURCE
SOURCE
MONITOR
FM
9
PICTURE
ZOOM
FREQ
RETURN
14
MENU
SETUP
12
ENTER
TITLE
PLAY
PAUSE
STOP
13
PREV
FR
FF
NEXT
10
SLOW
3
1
2
REPEAT
6
4
5
7
8
9
DISP.
SUB
0
A-B
GO
TITLE
MUTE
AUDIO
PBC
ZOOM
15
16
17
11
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

A-1250

Table of Contents