Table of Contents
Advertisement
8.2
Control elements
Control elements in the device are used to fulfil the basic functions of "Switching", "Dimming",
Blinds", "Value", "Scenes" and RTC. The elements can include switches, buttons and sliders.
This makes possible the button mode, (executing the function with one press), the tipping mode
(executing the function by pressing and holding), as well as controller mode (moving a slider).
Basic structures of control elements
Fig. 30:
Different statuses of the same control element
[1] Status display of "Device"
[2] Designation of "Control element"
[3] Function button
[4] Status display of "Device"
[5] Function button
Control element
Status display of device [1]
(both name or designation of channel)
Designation of control element [2]
Function button (e.g. push-button) [3]
Status display of device [4]
(both name or designation of channel)
Function button (e.g. push-button) [5]
Table 4: Basic structure of control elements
Product manual 2CKA001473B9085
NOTE
Additional functions can be called up within some control elements
(e.g. RTC) by swiping.
Description
The device is switched off (lettering is dark).
Light control:
Blind functions:
Climate functions:
Scenes:
The function is triggered with a press of the
button, for example (it can also display the status,
here: "Device off").
The device is switched on (Lettering: white /
bright).
The function is triggered with a press of the
button, for example (can also display the status,
here: "Device on").
Operation
Yellow
Blue
Orange
Magenta
│30
Advertisement
Table of Contents
